The Tecnare SW218V is a very powerful double 2x18” hybrib subwoofer cabinet. It has been designed for medium to long throw sound reinforcements. The response given with this subwoofer is very deep, starting at 38 Hz. It delivers a tight punch combined with a low deep response. The acoustic loading of the Speakers, perfectly matched, prevents cones to over run maximum cone displacement. It is the perfect solution for all kind of touring systems. Castors can be supplied as an accessory. The system can be supplied in active Pcc Version or passive one. The design includes two very powerful 4” voice coil 18” speakers. The system can be passive (SW218V), or selfpowered with remote PC Control (SW218V PCC). SW218V PCC is self-powered with two mono modules amplification and is controlled with a DSP (Original, Cobranet, or Advanced series) built inside, with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, while modifying any of the various audio controls available on the system. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged texture finish and protected with specially treated grills.Z
Frequency Response: 38 Hz – 280 Hz ±4dB, measured on axys.
Nominal Dispersion: Omnidirectional.
Impedance: 4 Ohm.
Sensitivity: 103 dB (1w/1m).
Calculated Max Spl: 138 dB continuous, 144 dB peak.
Power Handling:
#2000 W nominal.
*4000 W continuous.
Dimensions (HxWxD): 108x58x83 cm.
Net Weight: 85 kg selfpowered Pcc version.
Components: 2×18” LF driver.
Construction:
18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating.
One recessed carrying handle.
Grille:
Powder coated perforated steel with acoustically transparent reticulated foam.
CONNECTORS
Audio:
Input: XLR 3 pin female.
Link: XLR 3 pin male.
Dsp Network:
Input: XLR 5 pin female.
Link: XLR 5 pin male.
Mains:
Neutrik Powercon male and link.
AMPLIFIER
Type: Class D networked DSP.
Power Output: 2×1500 watts continuous @8 ohms (1kHz, 0.01% THD)
Dynamic Range: 110dB
Input Clip: 10dBu
Bandwidth: 20Hz – 20kHz ±0.5dB
Power Requirements: 100V to 240V AC @50/60Hz.
Tags: Tecnare SW218V
Viewed
Tecnare SW218V
The Tecnare SW218V is a very powerful double 2x18” hybrib subwoofer cabinet. It has been designed ..
0,00€ S/IVA: 0,00€
DT 44/2-250
Dimensions:Length: 2500mmWidth: 400mmHeight: 400mmWeight: 15,6kgDiameter: 50mm..
369,74€ S/IVA: 300,60€
Sense 15 speaker Passive
SPECIFICATIONS - Woofer: 15 "AA PA1575, aluminum basket, 75mm voicecoil- High Driver: 1 "compr..
349,00€ S/IVA: 283,74€
Tecnare SW-118H
The SW118H is a folded horn loaded subwoofer designed for use in disco applications (nightclubs an..
0,00€ S/IVA: 0,00€






