The IBZA10 is a trapezoidal compact full range loudspeaker, which houses a long excursion 10” and high frequency 1 inch compression driver. It has a highly extended bass performance for such a small volume, with a well-balanced mid and high section. This two-way system is designed for applications where high output is required from a compact enclosure. It has been designed for use as stand-alone full-range speaker or together with a passive sub woofer (E.G. the SW115). The horn can be rotated through 90° in order to swap the horizontal and vertical dispersion patterns. The box houses multiple internal rigging points for ground-support, truss and wall mounting, pole mount socket, and Speakon NL4 connectors. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially grills. The system’s choice can be passive (IBZA10), and self-powered with remote PC control (IBZA10 PCC). IBZA10 PCC is self-powered with two way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

Flying Hardware: M8 rigging points

 Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

http://www.tecnare.com/pdf_NEW/Tecnare_IBZA10.pdf