The IBZA15 is a trapezoidal full range louds - peaker high performance, wide-bandwidth system in a compact and efficient package. Extended fre - quency response is provided by a bass reflex tuned 15 inch LF driver and a 1.4 inch exit compression driver mounted on a 80° x 50° constant directivity HF horn. This two-way system is designed for appli - cations where very high output is required from a compact enclosure. It has been designed for use as stand-alone full-range speaker or together with a passive sub woofer (E.G. the SW215). The box houses multiple internal rigging points for ground-support, truss and wall mounting, pole mount socket, and Speakon NL4 connectors. The enclosure has been made with the latest techniques ensuring a perfect and rigid construc - tion. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially grills. The system’s choice can be passive (IBZA15), and self-powered with remote PC control (IBZA15 PCC). IBZA15PCC is self-powered with two way amplification and controlled with a DSP built in - side, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the para - meters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be mana - ged, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, the four of them without using the soft - ware, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or trans - fer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available. 

Frequency Response: 48Hz – 18kHz ±4dB, measured on axys.
Nominal Dispersion: 80°H x 50°V@-6db points.
Impedance: 8 Ohm.
Sensitivity: 101dB (1w/1m)
Calculated Max Spl: 129dB continuous, 135 dB peak.
Power Handling:
#650 W nominal
*1000 W continuous.
Dimensions (HxWxD): 633x455x483 mm
Net Weight: 33 kg selfpowered Pcc version.
Components: 1×15″ 1/2” LF driver, 1×2” HF driver on an exponential horn.

Construction:
16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating.
One recessed carrying handle.
Grille:
Powder coated perforated steel with acoustically transparent reticulated foam.

AMPLIFIER (self-powered series)
Type: Class H inc SMPA and networked DSP.
Power Output: 620 watts r.m.s. @ 8 ohms (1kHz, 0.01% THD) + 220 watts r.m.s. @ 8 ohms (1kHz, 0.01% THD)
Dynamic Range: 110dB
Input Clip: 10dBu
Bandwidth: 20Hz – 20kHz ±0.5dB
Power Requirements: 100V to 240V AC @ 50/60Hz
Flying Hardware: M8 rigging points.

http://www.tecnare.com/pdf_NEW/Tecnare_IBZA15.pdf