The V15 is a lightweight, flexible and multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a main PA or as a stage monitor. The design includes a powerful 3” voice coil 15” speaker CAD tuned into a vented box, and a 1.4” exit compression driver coupled to an asymmetrical rotatable horn to provide a smooth and clear high frequency reproduction. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system can be passive (V15), or selfpowered with remote PC control (V15 PCC). V15 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, by only clicking on the rear panel. Through this technique of operation, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

Frequency Response: 42 Hz – 17 kHz ±4dB, measured on axys.
Nominal Dispersion: 80°H x 60°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern.
Impedance: 8 Ohm.
Sensitivity: 101dB (1w/1m)
Calculated Max Spl: 129dB continuous.
Power Handling:
720 W nominal / 1050 W continuous.
Dimensions (HxWxD): 715x445x395 mm
Net Weight: 34 kg selfpowered Pcc version.
Components: 1×15” LF driver, 1×1.5” HF driver on a rotatable exponential horn.

AMPLIFIER (self powered series)
Type: Class H inc SMPA and networked DSP.
Power Output: 620 watts r.m.s. @ 8 ohms (1kHz, 0.01% THD) + 220 watts continuous @ 8 ohms (1kHz, 0.01% THD)
Dynamic Range: 110dB
Input Clip: 10dBu
Bandwidth: 20Hz – 20kHz ±0.5dB
Power Requirements: 100V to 240V AC @ 50/60Hz
Flying Hardware: M8 rigging points.

Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

http://www.tecnare.com/pdf_NEW/Tecnare_V15.pdf